Load data for .32 ACP (7.65 Browning) + .312 | 85gr | Hornady XTP

Recommended Powder(s): ADI AP 70N, Hodgdon Universal, Maxam CSB 1, Maxam CSB 2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.312 \| 85gr \| Hornady XTP
Manufacturer SKU:	32050
Bullet Weight:	85gr \| 5.5g
Bullet Diameter:	0.312" \| 7.92mm
Bullet Length:	0.450" \| 11.4mm
Caliber:	.32 ACP (7.65 Browning) load data
Case Length (l3):	0.677" \| 17.2mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.158" \| 4.0mm
Shank Seated Depth:	0.158" \| 4.0mm
Case Capacity:	9.3 Grains of Water \| 0.60 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	23206 psi \| 1600 bar
LID:	LID_B2727_C409
Last updated:	2025-02-02

Load data for 80 loads in caliber .32 ACP (7.65 Browning) with .312 | 85gr | Hornady XTP bullet and 40 powders such as ADI AP 70N, Hodgdon Universal, Maxam CSB 1, Maxam CSB 2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N 👍	<<locked>>	72%	22234	96%	**06	100%
ADI AS 30	<<locked>>	78%	22829	98%	**27	100%
ADI AS 50N	<<locked>>	74%	21669	93%	**43	100%
Accurate No. 2	<<locked>>	77%	21553	93%	**53	91%
Accurate Solo 1000	<<locked>>	78%	23177	100%	**47	100%
Accurate Solo 1250	<<locked>>	86%	22017	95%	**83	99%
Alliant BULLSEYE	<<locked>>	73%	21480	93%	**02	96%
Alliant UNIQUE	<<locked>>	88%	22292	96%	**35	96%
Baschieri & Pellagri 100	<<locked>>	81%	22887	99%	**53	100%
Hodgdon Clays	<<locked>>	68%	21799	94%	**5	100%
[Hodgdon HS-6]*	<<locked>>	74%	23105	100%	**29	85%
[Hodgdon Longshot]*	<<locked>>	70%	22452	97%	**25	88%
Hodgdon Universal 👍	<<locked>>	80%	22234	96%	**06	100%
Hodgdon TrailBoss	<<locked>>	96%	8166	35%	**2	97%
Lovex S011	<<locked>>	68%	22234	96%	**50	100%
Lovex S020	<<locked>>	81%	23018	99%	**19	98%
Maxam CSB 1 👍	<<locked>>	91%	23076	99%	**96	100%
Maxam CSB 2 👍	<<locked>>	89%	20943	90%	**12	100%
Maxam CSB 3	<<locked>>	84%	23003	99%	**86	100%
Maxam CSB 4	<<locked>>	76%	21103	91%	**33	100%
Maxam CSB 5	<<locked>>	74%	23134	100%	**30	100%
Ramshot Silhouette	<<locked>>	71%	21799	94%	**06	93%
[Ramshot True Blue]*	<<locked>>	69%	23134	100%	**25	88%
ReloadSwiss RS 12	<<locked>>	77%	21176	91%	**06	100%
ReloadSwiss RS 20	<<locked>>	93%	22466	97%	**52	98%
Rottweil P 801	<<locked>>	69%	21132	91%	**63	100%
SNPE Vectan A0	<<locked>>	88%	22365	96%	**79	95%
SNPE Vectan BA 9	<<locked>>	78%	21785	94%	**60	98%
SNPE Vectan BA10	<<locked>>	67%	22829	98%	**4	100%
[SNPE Vectan BA7 1/2]*	<<locked>>	96%	22031	95%	**96	86%
SNPE Vectan BA9 1/2	<<locked>>	79%	21103	91%	**66	99%
Somchem MP200	<<locked>>	81%	22727	98%	**22	94%
Somchem MS200	<<locked>>	83%	21625	93%	**86	96%
[Vihtavuori 3N37]*	<<locked>>	91%	21799	94%	**32	88%
Vihtavuori N320	<<locked>>	78%	21480	93%	**63	100%
Vihtavuori N32C Tin Star	<<locked>>	92%	15751	68%	**2	100%
Vihtavuori N330	<<locked>>	83%	21277	92%	**12	100%
Vihtavuori N340	<<locked>>	85%	21843	94%	**96	95%
[Vihtavuori N350]*	<<locked>>	93%	21161	91%	**09	87%
Winchester 231	<<locked>>	68%	22640	98%	**83	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	61%	15896	69%	**8	97%
ADI AS 30	<<locked>>	63%	15476	67%	**6	100%
ADI AS 50N	<<locked>>	60%	14924	64%	**2	100%
[Accurate No. 2]*	<<locked>>	61%	13198	57%	**9	83%
Accurate Solo 1000	<<locked>>	63%	16172	70%	**9	100%
Accurate Solo 1250	<<locked>>	63%	11995	52%	**3	93%
Alliant BULLSEYE	<<locked>>	61%	15243	66%	**1	91%
[Alliant UNIQUE]*	<<locked>>	63%	11618	50%	**3	85%
Baschieri & Pellagri 100	<<locked>>	63%	14054	61%	**6	98%
Hodgdon Clays	<<locked>>	62%	18840	81%	**2	100%
[Hodgdon HS-6]*	<<locked>>	65%	17738	76%	**17	80%
[Hodgdon Longshot]*	<<locked>>	62%	17158	74%	**14	83%
Hodgdon Universal	<<locked>>	63%	14286	62%	**8	96%
Hodgdon TrailBoss	<<locked>>	88%	7165	31%	**9	96%
Lovex S011	<<locked>>	60%	17651	76%	**5	99%
[Lovex S020]*	<<locked>>	62%	12720	55%	**9	89%
[Maxam CSB 1]²	<<locked>>	59%	10109	44%	**4	90%
Maxam CSB 2	<<locked>>	62%	9892	43%	**6	96%
Maxam CSB 3	<<locked>>	61%	12575	54%	**6	97%
Maxam CSB 4	<<locked>>	62%	14373	62%	**6	100%
Maxam CSB 5	<<locked>>	60%	15273	66%	**9	100%
[Ramshot Silhouette]*	<<locked>>	62%	16143	70%	**8	88%
[Ramshot True Blue]*	<<locked>>	61%	17840	77%	**17	83%
ReloadSwiss RS 12	<<locked>>	60%	12923	56%	**5	100%
[ReloadSwiss RS 20]*	<<locked>>	60%	9587	41%	**7	82%
Rottweil P 801	<<locked>>	62%	16621	72%	**4	100%
[SNPE Vectan A0]*	<<locked>>	63%	11821	51%	**3	84%
SNPE Vectan BA 9	<<locked>>	62%	14127	61%	**6	93%
SNPE Vectan BA10	<<locked>>	63%	20030	86%	**2	100%
[SNPE Vectan BA7 1/2]*	<<locked>>	85%	16911	73%	**4	81%
SNPE Vectan BA9 1/2	<<locked>>	63%	13358	58%	**9	94%
[Somchem MP200]*	<<locked>>	62%	13503	58%	**2	86%
[Somchem MS200]*	<<locked>>	62%	12691	55%	**3	87%
[Vihtavuori 3N37]*	<<locked>>	77%	14881	64%	**4	81%
Vihtavuori N320	<<locked>>	60%	12604	54%	**9	99%
[Vihtavuori N32C Tin Star]²	<<locked>>	59%	7078	31%	**6	99%
Vihtavuori N330	<<locked>>	62%	11603	50%	**9	94%
[Vihtavuori N340]*	<<locked>>	61%	10965	47%	**7	84%
[Vihtavuori N350]*	<<locked>>	81%	15679	68%	**8	82%
Winchester 231	<<locked>>	61%	18144	78%	**04	99%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.